System - D-Link DAP-1525 User Manual

Section 3 - Configuration
Use this option to save the current Access Point
Save Settings
configuration settings to a file on the hard disk
To Local Hard
of the computer you are using. First, click the
Drive:
Save button. You will then see a file dialog,
where you can select a location and file name
for the settings.
Load Settings Use this option to load previously saved Access
From Local Point configuration settings. First, use the
Hard Drive: Browse control to find a previously save file of
configuration settings. Then, click the Upload
Settings button to transfer those settings to the
Access Point.
Restore To Click the Restore Device button to restore all
Factory configuration settings back to the settings that
Default were in effect at the time the Access Point was
Settings: shipped from the factory. Any settings that have
not been saved will be lost, including any rules
that you have created. If you want to save the
current Access Point configuration settings, use
the Save button above.
Reboot The
Device: Click to reboot the access point.
Click the Clear button to restore the device back
Clear
Language to the English interface version and remove
Pack: other languages installed for the system web
pages.
D-Link DAP-1525 User Manual

System

27