Specifications - Makita 6217D Instruction Manual

ENGLISH
1-1. Battery cartridge
1-2. Button
2-1. Switch trigger
3-1. Reversing switch lever
3-2. Clockwise
3-3. Counterclockwise
4-1. Speed change lever

SPECIFICATIONS

Capacities
-1
No load speed (min
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for drilling and screw driving in wood,
metal and plastic.
For Model 6207D
Noise
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
The noise level under working may exceed 85 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
For Model 6217D,6317D
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 85 dB (A).
Explanation of general view
5-1. Lock button
5-2. Action mode change lever
6-1. Adjusting ring
6-2. Graduations
6-3. Pointer
7-1. Sleeve
7-2. Ring
Model
Steel
Wood
Wood screw
Machine screw
High
)
Low
Overall length
Net weight
Rated voltage
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h,D
) : 72 dB(A)
pA
6207D
10 mm
233 mm
1.7 kg
D.C. 9.6 V
ENE034-1
Vibration
The vibration
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
ENG103-1
For Model 6337D
Noise
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
ENG202-1
Sound pressure level (L
The noise level under working may exceed 85 dB(A)
sum)
Vibration
The vibration
determined according to EN60745-2-1:
Work mode: Drilling into metal
Vibration emission (a
ENG101-1
For Model 6347D
For European countries only
Noise
The typical A-weighted noise level determined according
to EN60745-2-1:
3
8-1. Bit
8-2. Bit holder
10-1. Limit mark
11-1. Brush holder cap
11-2. Screwdriver
6217D 6317D
25.4 mm
6 mm x 75 mm
13 mm
0 - 1,300
0 - 400
1.9 kg 2.0 kg
D.C. 12
D.C. 12 V
Wear ear protection.
total value (tri-axial
) : 2.5 m/s
h,D
) : 70 dB(A) or less
pA
Wear ear protection
total value (tri-axial
) : 2.5 m/s
h,D
6337D 6347D
13 mm
32 mm 38 mm
10 mm x 89 mm
243 mm
2.1 kg 2.4 kg
D.C. 14.4 V D.C. 18 V
ENG202-1
vector sum)
2
or less
ENG103-1
ENG202-1
vector sum)
2
or less
ENG101-1