Process:
1. Remove front panel light cable from"PANEL1" slot of M/B.
2. Remove USB1 cable from M/B"F_ USB3"。
3. Remove USB2 cable from M/B"F_ USB4"。
4. Remove Card reader cable from M/B"USB2".
5. Remove audio cable from the "AUDIO" port on M/B.
Notice:
I.
Recovery switch cable is next to FDD port, and the black cable face to the top of
Chassis.
II.
Intrusion switches cable face to front bezel of chassis.
Process:
1. Remove Master HDD from the first HDD location.
2. Remove Slave HDD from the second HDD location. (Optional by SKU)
Remove Cables
Remove HDD
43