Air Filter - Coleman Powersports KT196-C Owner's Manual

Table of Contents

Advertisement

AIR FILTER

The air cleaner element needs to
be cleaned or replaced periodically
(see chart for cleaning/replace-
ment intervals). The air filter
element will need to be cleaned
more often if Go Kart is ridden in
muddy, wet, or dusty conditions. A
clean air filter will help the Go Kart
to run at peak performance allow-
ing better gas mileage, more power
and will protect the engine from the
damaging effects of dirt entering
the engine.
Air filter removal,
inspection and
cleaning instructions
1. Locate the air filter assembly (1)
2. Remove the Air filter assembly
cover by removing the air filter
cover knob (2).
3. Remove the air filter element
from the assembly by removing the
wing nut (3)
3. Remove the foam element (4)
from the paper air filter element
(5) and clean foam element with
mild soap and water. Rinse and
squeeze out excess water and allow
to dry .
Note: If foam element (4) is
damaged, replace.
4. Inspect the air filter paper
element (5) for dirt and damage. If
dirty, gently tap element on ground
to remove any excess debris.
Gently blow out element from the
inside with compressed air.
element is too clogged or damaged
for continued use, replace the
element.
5. Once cleaned or replaced,
re-install.
MAINTENANCE
Clean air filter more frequently if
Go Kart is driven in wet, muddy
or dusty conditions.
Driving in the above conditions
without cleaning frequently can
plug up the air filter which can
cause poor gas mileage, low
power and cause damage to the
engine.
1
Air Filter
Assembly
If
24
CAUTION
2
3
4
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents