Connector Descriptions - opticis IPKVM-500-ED User Manual

▶ List of L3 Switches
(1) Cisco WS-C3560X-24(48)
(2) Alcatel-Lucent OS6850-24(/48)
(3) Huawei S5720-28(24/48)p
(4) 3com (HP) 3CR17254-91 (HP5500G-24(/48)G)
▶ For more technical support including bandwidth design, network topology, and selection &
setup with Network Switch (L2/L3), visit Opticis web site, www.opticis.com, or contact
techsupp@opticis.com
▶ But, point-to-point connection between one pair of IPKVM-500-ED can be directly
connected (with CAT5e or CAT6) without network switch.
♦ Control PC requirements
▶ Provided PC program to manage user accounts, network information and connection of
IPKVM-500-EDs.
▶ Requirements: Windows XP and Window7 (and its higher versions).
♦ AC / DC Power Adapter Technical Advisory
▶ The IPKVM-500-ED is designed to use mainly external +5V AC / DC power adaptor. The
internal power supplied through a HDMI pin (#18) from the graphic source is used to
identify normal connection between a source and TX, IPKVM-500-E.
♦

Connector descriptions

▶ 5V AC / DC Power (TX & RX):
Connect the 5V AC / DC Power Adaptor to the connector of each device. When the 5V
AC/DC Power Adaptor is connected to the device, the power LED is turned on. For more
information on LEDs, see "LED indication"
▶ HDMI IN (TX):
Connect a video source (such as a PC) to HDMI IN receptacle over HDMI cable.
▶ HDMI OUT (RX):
Connect a digital display to HDMI OUT receptacle over HDMI cable.
▶ Local Display (TX):
Connect a digital display to Local Display receptacle over HDMI cable.
▶ RJ-45 (TX & RX):
Connect a RJ-45 network cable (CAT5e / CAT6) to this connector.
▶ mini USB port (TX):
Connect a USB port in PC to this connector for HID mouse or Keyboard.
▶ USB A Type (TX):
Connect a local mouse and/or a keyboard with 2 port USB hub.
- 6 -