Assembly And Control; To Assemble The Handle; To Adjust The Handle Height; To Assemble The Grass Catcher - Husqvarna LC 247 Workshop Manual

Delivery and service

2.2 Assembly and control

2.2.1 To assemble the handle

1. Loosen the lower knobs.
2. Slide the knobs to the ends of the grooves on both
sides of the machine.
3. Fold the handles to its upright position.
4. Slide the knobs up towards the handle until they stop
and a click is heard.
5. Screw on the handle with the knob.
6. Connect the starter cord.

2.2.2 To adjust the handle height

1. Loosen the lower knobs.
6 – English
2. Move the knobs up in the direction of the handle until
they stop and a click is heard. Handle height can be
set to 2 different positions, Tighten the knobs fully.

2.2.3 To assemble the grass catcher

1. The collector's handle situated on the frame must be
placed over the collector bag.
2. Fasten the lower part of the frame in the groove
underneath the collector.
3. Secure the frame by using the quick-action clips.
4. Make sure the machine's discharge deck is clean
and free from grass cuttings.
5. Hook the collector onto the top edge of the chassis.
6. Place the collector tongue in the machine's
discharge deck.