Each Setting And Adjustment; How To Update Firmware - Pioneer VSX-1020-K Service Manual

1

8. EACH SETTING AND ADJUSTMENT

8.1 HOW TO UPDATE FIRMWARE

Workflow
A
Enter the UPDATE PANEL mode.
Check a current version.
Update it.
B
Update completed.
(Turn the power OFF automatically.)
Enter the UPDATE PANEL mode again.
Check an updated version.
C
Turn the power off.
(Release the UPDATE PANEL mode.)
MAIN com (EMMA), SUB com (EVENT) and DSP Flash ROM Update by USB Memory
and the Confirmation of the Version
UPDATE PANEL Mode (Version update)
[Preparations]
D
1. Copy the UPDATE FILE to the root directory of the USB Memory.
Note: NEVER copy several UPDATE FILES to the root directory of the USB Memory.
Copy only the corresponding UPDATE FILE.
2. Turn off the power to this unit by setting Multi-Zone to "OFF".
3. Connect the USB Memory to the USB terminal (A type) of the front panel.
[Procedure]
1. While holding down "TUNE↑" key on the front panel, press "STANDBY ON/OFF" key and
moves to the UPDATE PANEL mode.
2. The updating process is as follows.
E
F
50
1
2
Updating process
Checking process
VSX-1020-K
2
3
3
4
4