Replacing the speakers
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts on the palm-rest assembly, place the left speaker on
the palm-rest assembly.
2
Route the speaker cable on the system board and adhere the tape to the system
board.
3
Using the alignment posts on the palm-rest assembly, place the right speaker on
the palm-rest assembly.
4
Replace the four screws (M2x2) that secure the speakers to the palm-rest
assembly.
5
Connect the speaker cable to the system board.
Post-requisites
1
Replace the battery.
2
Replace the
base
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before
27