Replacing the fans
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Align the screw holes on the left and right fans with the screw holes on the
system board.
2
Replace the two screws (M1.6x3L) that secure the left and right fans to the
system board.
3
Connect the left and right fan cables to the system board.
4
Connect the camera cable to the system board.
5
Align the screw hole on the wireless antenna and camera cable bracket to the
screw hole on the system board.
6
Replace the screw (M1.6x3L) that secures the wireless antenna and camera
cable bracket to the system board.
7
Adhere the tape that secures the camera cable to the fans.
Post-requisites
Replace the
base
48
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before