Replacing The Base Cover; Procedure - Dell XPS 13 Service Manual

Replacing the base cover

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.

Procedure

1 Connect the battery cable to the system board.
2 Align the screw holes on the base cover with the screw holes on the palm-rest
assembly and snap the base cover into place.
3 Replace the eight screws (M2x3, Torx) that secure the base cover to the palm-
rest assembly.
computer. After working inside your computer, follow
After working inside your computer. For more safety best
www.dell.com/
Before
17