Ftg Mode - LG 43UV770M Commercial Mode Setup Manual

Commercial Mode Overview (Cont.)
Installer Menu
To create a Master TV Setup, you will need to know how to access
the commercial controller (PTC) Installer Menu and make changes to
the default values as required. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. See pages
43 to 54 for information on accessing the Installer Menu and for
detailed descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure
a Target TV. The Master TV's clonable setup menu features should
be configured as part of the Master TV Setup. If there are features in
the Master TV's setup—channel icons or labels, digital font options,
etc.—that are not set or that are set incorrectly, those features also
will not be set or will be set incorrectly in the Target TVs. See pages
58 to 64 for detailed information on Clone (.tlx) files and cloning
requirements and procedures.
External MPI or TLM Control
To control the TV using an external MPI control device, you must
use the TV's GAME CONTROL/MPI port for communication purposes.
In these TVs, Installer Menu item 118 POWER SAVINGS controls the
power circuitry for both the embedded b-LAN module and the GAME
CONTROL/MPI port; therefore, to ensure that the GAME CONTROL/
MPI port circuitry is powered, thus enabling MPI communication,
Installer Menu item 118 POWER SAVINGS must be set appropriately.
See Installer Menu item descriptions as well as Reference section,
"b-LAN Setup & Overview," for further information.
To control the TV using an external TLM control device, you must use
the TV's CONTROL & SERVICE port for communication purposes.
See Reference section, "TLM Communication Parameters," for further
information.

FTG Mode

In this mode, an FTG Channel Map enables the decryption of each
®
Pro:Idiom encrypted channel. The FTG Channel Map also provides
logical channel mapping of physical RF channels (digital and analog),
IP streams, and Aux inputs. The method for creating the FTG
Channel Map is ultimately determined by which element of the TV
will "own" the FTG Channel Map—the CPU or the EBL.
For these TV models, there are two FTG Modes—FTG Mode via CPU
and FTG Mode via EBL—which are separate and distinct FTG Modes
of operation, each with its own unique advantages and requirements,
as outlined on the following page.
8
PTC INSTALLER MENU
xxUV770M
CPU - CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 SW 5331 7F60
PTC V#.##.### CPU V#.##.##.##
Typical Installer Menu
TV Setup Menus (Quick Settings)
PICTURE
Picture
Sound
Smart Picture Mode
Picture Mode Settings
Channels
Aspect Ratio Settings
16:9
General
Safety
Accessibility
TV Setup Menus (Advanced Settings)
X
206-4324