Download  Print this page

LG 49UH610A Owner's Manual

Led tv
Hide thumbs


Safety and Reference
* LG LED TVs are LCD TVs with LED backlighting.
Please read this manual carefully before operating your TV and
retain it for future reference.
P/No : MFL69272402 (1603-REV04)



  Also See for LG 49UH610A

  Related Manuals for LG 49UH610A

  Summary of Contents for LG 49UH610A

  • Page 1 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TVs are LCD TVs with LED backlighting. Please read this manual carefully before operating your TV and retain it for future reference. 49UH610A 43UH6100 50UH6300 43UH6500 43UH7500 49UH7700 55UH8500 65UH9500...
  • Page 2: Important Safety Instructions

    Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Always comply with the following precautions Follow all instructions. to avoid dangerous situations and ensure peak performance of your product. Do not use this apparatus near water. WARNING/CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN TO REDUCE THE RISK OF ELECTRIC SHOCK...
  • Page 3 the apparatus. When a cart is used, use caution CAUTION concerning the Power Cord when moving the cart/apparatus combination to (Can differ by country): avoid injury from tip-over. Check the specification page of this owner’s manual to be certain concerning current requirements.
  • Page 4 TV, unplug the power cord and contact an Do not attempt to modify this product in any authorized service center. way without written authorization from LG Keep the product away from direct sunlight. Electronics. Unauthorized modification could Never touch this apparatus or antenna during a void the user’s authority to operate this product.
  • Page 5: Viewing 3D Imaging

    - Electrical circuit humming/panel buzzing watching the 3D video and take a rest. A low level noise is generated from a high- Only use LG 3D glasses. Otherwise, you may not speed switching circuit, which supplies a be able to view 3D videos properly.
  • Page 6 Preparing Antenna Isolator Installation Guide (Depending upon model) - Use this to install TV in a place where there is a voltage difference between TV Set and GND of NOTE antenna signal. If there is a voltage difference between TV Set and GND of antenna signal, the When the TV is turned on for the first time after antenna contact might be heated and excessive being shipped from the factory, initialization of...
  • Page 7: Optional Extras

    Lifting and Moving the TV CAUTION Do not use any unapproved items to ensure the safety and product’s lifespan. When moving or lifting the TV, read the following Any damages or injuries by using unapproved to prevent the TV from being scratched or items are not covered by the warranty.
  • Page 8: Using Button

    Accesses the setting menu. Clears on-screen displays and returns to TV NOTE viewing. 43/49UH6100, 49UH6090, and 49UH610A does Changes the input source. not have a Joystick button but has only a power On/Off button. (A Type)
  • Page 9: Mounting On A Wall

    Detailed instructions will be included with the wall mount. We recommend that you use an LG brand wall mount. The LG wall mount is easy to adjust or to connect the cables. When you do not use LG’s wall mount bracket,...
  • Page 10 Model 50UH6300 58UH6300 49UH610A 60/65UH615A 55UH615A 60/65UH6150 49UH6100 60/65UH6550 49UH6090 60/65UH7500 55UH6090 60/65UH7700 55UH6150 60/65UH8500 49UH6500 2 Pole Stand Hole 55UH6550 49/55UH7500 49/55UH7700 When using the wall mounting bracket, apply 55UH8500 the adhesive protective label or protective cover VESA (A x B)
  • Page 11: Connecting To An Antenna Or Cable

    Connections (Notifications) Complete all connections between devices, and then connect the power cord to the power outlet to prevent damage to your TV. You can connect various external devices to the TV. NOTE Supported external devices are: HD receivers, DVD players, VCRs, audio systems, USB storage devices, Use a signal splitter to use 2 TVs or more.
  • Page 12: Remote Control

    Remote Control Accesses your favorite channel list. Shows information on the current program. Mutes all sounds. (Depending upon model) Scrolls through the saved channels. The descriptions in this manual are based on Moves to the previous or next screen. the buttons on the remote control. Please read this manual carefully and use the TV correctly.
  • Page 13: Magic Remote Functions

    Magic Remote Functions (Depending upon model) Magic remote battery is low. When the message Change the battery. is displayed, replace the batteries. To install batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover.
  • Page 14: Registering Magic Remote

    Registering Magic Remote LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of...
  • Page 15: Specifications

    Troubleshooting Environment Condition Operating Temperature 0 °C to 40 °C (32 °F to 104 °F) Cannot control the TV with the remote control. Operating Humidity - Check if anything such as tape has been placed Less than 80 % over the receiver. Storage Temperature - Check if there is any obstacle between the - 20 °C to 60 °C (-4 °F to 140 °F)
  • Page 16 20 cm (7.8 inches) between the device and the body. Contains FCC ID: BEJWN8122E1 Contains IC: 2703H-WN8122E1 External Control Device Setup To obtain the external control device setup information, please visit...
  • Page 17: Fcc Notice

    Regulatory This equipment should be installed and operated with minimum distance 20 cm (7.8 inches) between the antenna and your body. Users must follow the specific operating instructions for FCC Notice satisfying RF exposure compliance. (For USA) Industry Canada Statement This equipment has been tested and found to (For Canada) comply with the limits for a Class B digital device,...
  • Page 18: Note To Cable/Tv Installer

    4 The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.(devices operating in the band 5250-5350 MHz with a maximum e.i.r.p. greater than 200 mW) 5 High-power radars are allocated as primary users (i.e.
  • Page 19: Child Safety

  • Page 20 Responsible Party: LG Electronics Inc. Address: 1000 Sylvan Ave. Englewood Cliffs NJ 07632 U.S.A TEL: 201-266-2534 LG Customer Information Center For inquires or comments, visit or call; 1-800-243-0000 USA, Consumer User The model and serial numbers of the TV are located on...
  • Page 21: External Control Device Setup

    OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference.
  • Page 22: Key Codes

    KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
  • Page 23 • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter which is not made nor provided by LG. • It can be purchased from computer stores that carry accessories for IT support professionals.
  • Page 24 EXTERNAL CONTROL DEVICE SETUP Phone jack Type • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and the TV, which is specified in the manual. * For other models, connect to the USB port. * The connection interface may differ from your TV.
  • Page 25: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
  • Page 26 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
  • Page 27 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
  • Page 28 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) To adjust Bass. To adjust the screen tint. You can also adjust in the AUDIO menu. You can also adjust tint in the PICTURE menu.
  • Page 29 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
  • Page 30 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
  • Page 31 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
  • Page 32 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : To set Ack [u][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 33: Wired Connection

    (All Settings) and press Wheel (OK). If the connection is completed, Connected to Internet is displayed. NETWORK Picture Sound TV Name [LG] webOS TV Channels Wired Connection (Ethernet) Not Connected Network Wi-Fi Connection Select the Network Wired Connection Connected to Internet...
  • Page 34 Internet service provider. Sound Sound iptime_xu.ji TV Name (The MAC address displayed on the right pane of iptime_shinsung.kang [LG] webOS TV Channels Channels iptime_ungkee.choi Wired Connection (Ethernet) the network status window should be registered Not Connected
  • Page 35 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must on the same local network. Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG phones). Enable your smartphone to share content files with other devices.
  • Page 36 * You can control your PC using the Magic Remote. (above WiDi version 4.2) It detects LG webOS TVs available, which supports WiDi. In the list, select the TV you want and click Connect. Enter the number shown on the screen into the input field ( ) on your laptop and then click Continue.
  • Page 37 Troubleshooting Wi-Fi Network Problems Checkpoints Make sure that you have the latest version of the software. - If you are using a Wi-Fi router, check whether you have the latest firmware installed. - If there are any available updates, update the firmware according to the manufacturer's instructions. - Check the current software version and if there is an available update, install it.
  • Page 38 Radio Frequency (RF) Interference and Absorbing Obstructions Interference Interference Interference Type of Barrier Type of Barrier Type of Barrier Potential Potential Potential Wood Water Medium Plaster High Synthetic material Bricks Medium Concrete High Glass Marble Medium Bulletproof glass High Metal Very High...
  • Page 39 Avant d’utiliser l’appareil, veuillez lire attentivement ce guide et conservez-le pour pouvoir vous y reporter ultérieurement. 55/60/65/75UH8500 65UH9500 86UH9500 (M5 X L12) (M4 X L12) (M4 X L20) ENGLISH Depending upon model P/No: MFL69289402 (1602-REV02) ESPAÑOL Según el modelo FRANÇAIS Selon le modèle...
  • Page 40 ENGLISH Read Safety and Reference. ESPAÑOL Leer Seguridad y Consultas. FRANÇAIS Lisez Sécurité et références. 55/60/65UH8500 75UH8500, 86UH9500 65UH9500...
  • Page 41 55/60/65UH8500 65UH9500 75UH8500 86UH9500...
  • Page 44 ENGLISH Depending upon model ESPAÑOL Según el modelo FRANÇAIS Selon le modèle 55/60/65/75UH8500 65UH9500 86UH9500...
  • Page 45 ENGLISH Depending upon model ESPAÑOL Según el modelo FRANÇAIS Selon le modèle...
  • Page 46 ENGLISH 55UH8500 60UH8500 65UH8500 75UH8500 MODELS (55UH8500-UA) (60UH8500-UA) (65UH8500-UA) (75UH8500-UD) 1,239.8 x 774.8 x 238.4 (mm) 1,348 x 836.8 x 281.9 (mm) 1,459.5 x 896.8 x 281.9 (mm) 1,680.6 x 1,020.3 x 341.0 (mm) With stand Dimensions 48.8 x 30.5 x 9.3 (inches) 53.0 x 32.9 x 11.0 (inches) 57.4 x 35.3 x 11.0 (inches) 66.1 x 40.1 x 13.4 (inches)
  • Page 47 ESPAÑOL MODELOS 55UH8500 60UH8500 65UH8500 75UH8500 (55UH8500-UA) (60UH8500-UA) (65UH8500-UA) (75UH8500-UD) MODÈLES FRANÇAIS Con base Dimensiones 1 239,8 x 774,8 x 238,4 (mm) 1 348 x 836,8 x 281,9 (mm) 1 459,5 x 896,8 x 281,9 (mm) 1 680,6 x 1 020,3 x 341,0 (mm) (Ancho x altura 48,8 x 30,5 x 9,3 53,0 x 32,9 x 11,0...
  • Page 48 (For USA and Canada only) (Para Estados Unidos y Canadá) This product qualifies for ENERGY STAR® in the factory default (Home configuration) setting. Changing the factory default settings or enabling other features may increase power consumption that could exceed the limits necessary to quality for ENERGY STAR®.