LG 43UV770M Commercial Mode Setup Manual page 78

IP Environment Setup (Cont.)
(Continued from previous page)
a) The Server Address field provides the option to specify the domain name of the Pro:Centric
server instead of the server's IP address. Select/highlight the Server Address field and press
OK on the Installer Remote. Then, use the Up/Down arrow keys to select either IP Address or
Domain Name from the drop-down list of options for defining the server.
b) Depending on your selection in the previous step, either:
• Enter the Pro:Centric server IP address in the IP Address field. The IP address must
match the IPv4 multicast address that is set in the Pro:Centric server.
• Enter the Pro:Centric server domain name in the Domain Name field. Note that in order
for the domain name to be resolved to an IP address, there must be a DNS entry for the
domain name.
For each data entry field: Use the arrow keys to select the field and press OK. Then, you
can either use the number keys on the Installer Remote to direct enter data values, or you
can use the arrow keys to select the appropriate number(s)/alphanumeric character(s) from
the pop-up virtual keyboard displayed at the bottom of the screen. When you are done,
select Enter from the virtual keyboard, and then press OK on the Installer Remote.
c) Enter the Pro:Centric server port number in the Port Number field. The port number must
match the port number that is set in the Pro:Centric server.
4. Select/highlight the Mode field and press OK on the Installer Remote to display the drop-
down list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric
Application Mode setting—Configuration Only, FLASH, GEM, or HTML. If the Pro:Centric
Application Mode is set to "Configuration Only," Pro:Centric application data will not be down-
loaded.
Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in
the EZ-Manager Wizard or Express Script, the specified mode will be reflected in this field.
If you change the mode in this menu, Installer Menu item 098 will now reflect the value you
selected here.
5. Select/specify the appropriate Update Event setting(s), as required. Based on Update Time
settings, the Wake For Update feature wakes the TV once daily to check for, and if applicable,
download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR
description on page 53 for additional information on Wake For Update functionality.
• Select/highlight the Update Event field and press OK on the Installer Remote. Then, use
the Up/Down arrow keys to select either Enable or Disable from the drop-down list of options.
When Update Event is set to "Enable," an Update Time field is displayed on the screen.
• If Update Event is enabled, set the Update Time as required. Use the arrow keys on the
Installer Remote to select/highlight the Update Time field, and then press OK. Hour, Minute,
and Meridiem fields will be displayed. Select each field in turn and specify the appropriate
Wake For Update time, as desired. Note that the Update Time set in this menu is based on a
12-hour clock. Ensure the meridiem (AM/PM) specification is set accordingly.
6. Once all fields are completed as required, use the arrow keys on the Installer Remote to return
to the IP Environment Menu, as necessary, or press
78
to exit the IP Environment Menu.
206-4324