Determining The Tv Operating Mode; Commercial Mode Overview - LG 43UV770M Commercial Mode Setup Manual

• Start Channel set for RF or IP delivered content.
• Pro:Centric data delivery over RF or IP.
• TV Zoning (Installer Menu items only) and Wi-Fi Zoning options for location-specific configurations.
You must use the Pro:Centric Direct Admin Client / Channel Map configuration utility to create the
Pro:Centric Direct Channel Map, define channel attributes, and set the Start Channel. Refer to the
Pro:Centric Direct Admin Client User Guide for further information.
Note: TV Zoning and Wi-Fi Zoning features are supported via ".tlx" file—typically a Clone (.tlx) file that has
been created from a Master TV Setup. See Reference section, "Using the TV's Zoning Features," for further
information.
While the TV is in Application Tuning Mode:
• Users can still access the Installer Menu using an LG Installer Remote; however, all Installer Menu
items will be read-only.
• While it is possible to update a TV's Installer Menu and/or Setup Menu settings locally using a USB
memory device / Clone (.tlx) file, any Pro:Centric Direct configuration changes are typically made
remotely via the Pro:Centric server / Pro:Centric Direct Admin Client. The Admin Client's Channel Map
configuration utility enables you to create and edit the Pro:Centric Direct Channel Map, while the TV
Configuration utility (in conjunction with a Clone [.tlx] file loaded on a server carousel) enables you to
make changes to TV Installer Menu and/or Setup Menu settings.
• If it becomes necessary to restore the TV to Pass-through Mode, it is possible to do so. See Reference
section, "Restoring Factory Defaults on the TV(s)," for further information.
Refer to the Pro:Centric Direct Admin Client User Guide for further information on configuration and
management via the Pro:Centric Direct Admin Client.

Determining the TV Operating Mode

To determine the operating mode of the TV, press MENU on the Installer Remote. The menu displayed
depends on the operating mode. See examples below.
If the Function Menu appears, the TV is in a mode (FTG, ATM, PPV, etc.) that does not allow the end
user to change the fundamental TV setup. If the TV setup menus (Quick Settings) appear, the TV is in
Pass-through Mode.
ASPECT RATIO
Aspect Ratio
Sound Out
Aspect Ratio
16:9
Just Scan
Audio Mode
^
Off
General
Safety
Accessibility
206-4324
Function Menu
Indicates the TV is not in
Pass-through Mode . While
the TV is in this mode,
Installer Menu settings can
be accessed as read-only.
Commercial Mode Overview (Cont.)
X
TV Setup Menus
Shows that the TV is in
Pass-through Mode .
11