Battery Disposal - Viper 5902 Owner's Manual

• Recommended: Turn on Battery Saver mode. When the remote
control is not used for more than 72 hours, the remote control
automatically will enter into a sleep state to conserve battery life.
Pressing any of the command buttons will wake up the device for
use. For more details on setting Battery Saver mode, please see
page ##.
• Your remote control can be turned off if not in use. For more
details on this feature, please refer to page ##.
• Your remote control has a vibrate motor than can be used when
tones are not required. Disabling the vibrate motor when not
needed can save battery life. For more details on this feature,
please refer to page ##.
• You can also change the way the OLED display is used. The
Responder HD remote has the ability to disable the animations
used for confirmation (ie: Arm, Disarm, Remote Start, etc) but still
display animations for system alarm triggers. For more details on
this feature, please refer to page ##.

Battery disposal

Directed Electronics cares about the environment. Your Responder HD
remote has an internal battery. If the battery should need to be dis-
posed of, please return to your authorized Directed Dealer or contact
Directed at 1-800-753-0600.
14
© 2009 Directed Electronics. All rights reserved.