Advertisement
M U N I C H H O M E S Y S T E M S
bathtube, shower or pool should never reach the switch or controller of the heater. If the HEATSCOPE®
is installed in such an environment with high humidity, the switches or other operati ng components
must be positi oned in such a way that they cannot be touched by persons who are in direct contact
with water. Bathroom heaters must not be operated with a separate automati c thermostat or ti mer.
When a radiant heater is installed in a bathroom, the CE standard requires that at least one heati ng
element visibly „glows" as soon as the unit is switched on.
15. CAUTION! To provide conti nued protecti on against the risk of electric shock, disconnect the supply
cord before cleaning., adjusti ng the angle or removing it from the wall/ceiling. Wait unti l the heati ng
elements are not glowing any more and the housing is noti cably cooled down. If buried cables are
used, switch off the power using an omnipolar switch. Wait at least 30 minutes aft er the last use
before you start cleaning it. All surfaces should be cleaned using a damp cloth only. Never use cleaning
products containing alkaline substances such as sodium hydroxide or soap, surfactants or solvents such
as alcohol. Use only a very soft cloth or a brush for the refl ector and the heati ng elements.
16. Make absolutely sure to always switch off the device aft er use.
US
GreenChance Inc. · 11265 Washington Blvd. · USA CA90230
Advertisement
