Titler - GE CG740 User Manual

Titler

The titler can create and store two different titles. Each title can contain two lines with
a total of 32 characters – 16 on each line. The built-in character register contains 47
different characters for creating titles.
TITLE SELECT – Button
TITLE SELECT Button
Creating a Title
1. Attach a power source, turn on the
camcorder, and place the CAMERA/
VCR switch in CAMERA.
2. Press TITLE to display the title page
graphics in the viewfinder.
3. Press TITLE SELECT to display the
other title page in the viewfinder.
4. Press EDIT ADV. to move the flashing
cursor to the place you want to begin
your title.
5. Select the first character for your title
by pressing TITLE SELECT + or –
until the character you want appears.
See the "Chart of Characters" for the
characters available in the titler's
register.
34
POWER PAUSE REW
STILL
PLAY F.FWD AUD • DUB • VID RECORD
TITLE SELECT EDIT ADV.
CAMERA/VCR Switch
TITLE Button
6. After you have selected the first
character, press EDIT ADV. to move
the flashing cursor to the next position
you want a character to appear.
If a blank space is desired, press EDIT
ADV. without selecting a character.
7. Repeat steps 4 – 6 until you have
completed the title.
Press TITLE SELECT if you want to
create a title on the other title page.
8. Press TITLE to remove the title from
the viewfinder and store it in memory.
Notes: The clock battery cell must be
installed to store the title.
Remove the title from the viewfinder for
normal recording.
EDIT ADV. Button
TITLE SELECT + Button