Set (Or Correct) The Display - GE CG740 User Manual

Date and Time Display
Set (or Correct) the Time and Date Display
Follow the steps below to set (or correct) the time and date display.
1. Install the clock cell battery as
described on the previous page.
2. Attach a power supply (battery or
adapter/charger) to the camcorder.
3. Slide the POWER switch and place the
CAMERA/VCR switch in CAMERA.
4. If the date and time display does not
appear in the viewfinder, press
DATE/TIME.
5. Press CLOCK SELECT until the part
of the display you want to set (or
correct) flashes.
12:00 AM
JAN. 1 1995
Display in Viewfinder
DATE/TIME Button
POWER Switch
CAMERA/VCR Switch
CLOCK SET Button
CLOCK SELECT Button
6. Press CLOCK SET until the correct
digit(s) appear.
Note: Press and hold CLOCK SET to
advance the digits faster.
7. When the correct digit is displayed,
press CLOCK SELECT. The next part
of the display will flash.
10:06 AM
JAN. 1 1995
Display in Viewfinder
8. Repeat steps 5 and 6 to set the correct
hour, minute(s), AM/PM, month, day,
and year.
9. After setting (or correcting) the time
and date, press CLOCK SELECT until
no part of the display flashes to start
the internal clock.
23