Insert And Remove The Battery; Powering The Camcorder - GE CG740 User Manual

Powering the Camcorder

Using the Battery to Power Your Camcorder
Insert Charged Battery
1. Insert battery with the arrow facing
down and "+" side of battery matching
"+ " side of battery compartment.
2. Press the battery down firmly until it
locks into place.
Notes: If the DC cable is attached to the
camcorder, remove it. The battery cannot
operate the camcorder if the DC cable is
attached.
The battery must be charged before it can
be used the first time.
ATTENTION: LEAD-ACID BATTERY MUST BE DISPOSED OF
PROPERLY. THE PRODUCT THAT YOU HAVE PURCHASED
CONTAINS A RECHARGEABLE BATTERY. AT THE END OF ITS
USEFUL LIFE, UNDER VARIOUS STATE AND LOCAL LAWS, IT
MAY BE ILLEGAL TO DISPOSE OF THIS BATTERY INTO THE
MUNICIPAL WASTE STREAM. CHECK WITH YOUR LOCAL
SOLID WASTE OFFICIALS FOR DETAILS IN YOUR AREA FOR
RECYCLING OPTIONS OR PROPER DISPOSAL.
12
Insert Charged Battery. Match "+" Side of
Battery to "+" on Camcorder.
Remove Battery
1. Slide BATT (battery) EJECT lever.
2. Remove battery from the camcorder.
Note: Remove the battery from the
camcorder when not using it. Store in a
cool, dry place.
BATT (Battery)
EJECT Lever
Pb