Enhancement Light - RCA CC6151 User Manual

Recording
Model CC6271 Only: Built-In Color Enhancement Light
Replace the Bulb Assembly
Carefully follow the instructions below.
Cautions
The video light and bulb need to cool for approximately 30 minutes after
the camcorder has been used before the bulb assembly is replaced.
Do not touch the light bulb with your fingers. If the bulb is accidentally
touched, wipe it with a soft cloth. A dirty bulb may cause smoke and have
a reduced service life.
To Replace the Bulb Assembly
1. Insert a flat nonmetallic object (such
as a plastic screwdriver) in the hole.
Bulb Assembly
Plastic
Screwdriver
2. Pull on the sides of the bulb
assembly and remove it from the
camcorder as shown.
3. Place the new bulb assembly into the
camcorder by inserting the top first
and then slide the assembly into
place.
(continued)
59