Electronic Function - Makita DSP600 Instruction Manual

1
1.
Refer to the table to select the proper speed for the
workpiece to be cut. However, the appropriate speed
may differ with the type or thickness of the workpiece. In
general, higher speeds will allow you to cut workpieces
faster but the service life of the blade will be reduced.
Number
1
2
3
4
5
CAUTION:
for using low speed rated saw blades but for
obtaining a speed which is suitable to material of
workpiece. Use only saw blades which are rated
for at least the maximum no load speed stated in
the SPECIFICATIONS.
NOTICE:
only as far as 5 and back to 1. Do not force it past
longer work.

Electronic function

operate because of the following features.
a certain level, the tool automatically stops to protect
motor.
Constant speed control
Electronic speed control for obtaining constant speed.
kept constant even under load condition.
Soft start feature
Soft start because of suppressed starting shock.
Blade rotating speed per
-1
minute (min )
-1
2,500 min
-1
-1
-1
-1
6,300 min
ASSEMBLY
CAUTION:
Always be sure that the tool is
before carrying out any work on the tool.
Hex wrench storage
When not in use, store the hex wrench as shown in the
1. Hex wrench
blade
CAUTION:
Be sure the circular saw blade is
installed with teeth pointing up at the front of the
tool.
CAUTION:
Use only the Makita wrench to
1. Depress the lock-off button and lower the handle
12 ENGLISH
1