S.R.Smith ROGUE GRAND RAPIDS Assembly And Installation Instructions Manual page 12

Garden Hose Adapter Installation Instructions
If connecting the Rogue
not an option you may connect the water system to a garden hose by following the
steps outlined below.
A.) Make sure that the Rogue
TM
Rapids water system has been
properly assembled as explained in
TM
the Rogue Grand Rapids
Installation Instructions. Next, apply
PVC glue around the end of the
garden hose adapter indicated by the
arrow in Figure 16.
B.) After the glue is applied quickly
insert the PVC fitting into one end of
PVC ball valve as shown in Figure 17.
C.) The final step is to thread a garden
hose into the PVC garden hose
adapter
.
TM TM
Grand Rapids water system to the pool plumbing system is
TM
Grand
TM
12
Figure 16
Figure 16
Figure 17
Figure 17