S.R.Smith ROGUE GRAND RAPIDS Assembly And Installation Instructions Manual page 10

15) Apply PVC glue to the inside of the slip end of the PVC Union. Insert the (#8)
PVC Spa Hose into the union as shown below in Figure 12.
16) Use a drill with a Phillips bit to fasten the (#4) Plastic Pipe Clamp to the ladder
as shown below in Figure 13a. The hose clamp should be attached with the
clamp aligned with the bottom of the step, See Figure 13b. Place (#6) Vinyl Cap
over visible portion of screw. Repeat this step for each tread on ladder.
Figure 13a
10
Figure 12
Figure 13b