Panasonic Lumix DC-GX9 Operating Instructions Manual page 48

Allows you to set the aperture, shutter speed, and other settings when in [ ] / [
[ ] modes.
Mode dial
*
Pressing the rear dial enables you to set the exposure compensation when [Exposure Dial] is set to
[OFF] in [Dial Set.] in the [Custom] ([Operation]) menu. In Manual Exposure Mode, you can correct
the exposure only when the ISO sensitivity is set to [AUTO].
Temporarily changing the operation of the front/rear dials ([Dial Operation
Switch])
Preparations
• Assign [Dial Operation Switch] to the function button
1
Press the function button
• A guide will be displayed showing the items temporarily assigned
to the front/rear dials.
• If no operations are performed, the guide will disappear in a few
seconds.
2
Rotate the front/rear dials while the guide is displayed
3
Press [MENU/SET] and set
• You can also complete this step by performing either of the
operations below:
– Press the shutter button halfway
– Press the rear dial
●
You can set the items to be assigned temporarily to the front/rear dials in [Dial Operation Switch
Setup] in [Dial Set.] in the [Custom] ([Operation]) menu.
48
Front dial
Programme Shift
Aperture value
Shutter speed
Aperture value
Buttons/Dials Used for Recording
Programme Shift
Aperture value
Shutter speed
Shutter speed
(→60)
(→49)
Basics
] / [ ] /
Rear Dial
*
*
*
*