Panasonic Lumix DC-GX9 Operating Instructions Manual page 49

■
Setting the operation methods of the front dial and rear dial
→ [Custom] →
[Assign Dial (F/SS)]
[Rotation (F/SS)]
[Exposure Dial]
[Exposure Comp.]
[Dial Operation Switch
Setup]
49
[Operation] → [Dial Set.]
Assigns the operations of the dials in Manual Exposure Mode.
[ F SS]:
Assigns the aperture value to the front dial, and the shutter speed to the
rear dial.
[ SS F]:
Assigns the shutter speed to the front dial, and the aperture value to the
rear dial.
Changes the rotation direction of the dials for adjusting the aperture
value and shutter speed.
[ ] / [ ]
[ON]: Compensates the exposure with the Exposure Compensation dial.
(–3 EV to +3 EV)
[OFF]: The Exposure Compensation dial is disabled.
• When [Exposure Dial] is set to [OFF], the Exposure Compensation
screen can be displayed by pressing the rear dial. (–5 EV to +5 EV)
(→112)
Assigns the Exposure Compensation to the front dial or the rear dial so
that appropriate exposure can be achieved simply by rotating them when
[Exposure Dial] is set to [OFF]. (–5 EV to +5 EV)
[ ] (Front Dial) / [
Sets the items to be assigned temporarily to the front/rear dials when you
press the function button to which [Dial Operation Switch] is assigned.
[ ] ([Front Dial Operation]) / [
• Items that can be set are as follows.
– [4K Photo Mode]
– [Photo Style]
– [Filter Effect]
– [Aspect Ratio]
– [AF Mode]
– [Highlight Shadow]
– [i.Dynamic]
• [Highlight Shadow] uses the two dials.
Buttons/Dials Used for Recording
] (Rear Dial) / [OFF]
] ([Rear Dial Operation])
– [i.Resolution]
– [Flash Mode]
– [Flash Adjust.]
– [Sensitivity]
– [White Balance]
– [Drive Mode]
Basics