Panasonic Lumix DC-GX9 Operating Instructions Manual page 152

Table of Contents

Advertisement

Recording mode:
• When using an interchangeable lens with [O.I.S.] switch (such as H-FS14140),
stabiliser function is activated if the [O.I.S.] switch of the lens is set to [ON] ([
at the time of purchase.)
[Rec] /
[Operation
Mode]
[E-Stabilization
(Video)]
[I.S. Lock
(Video)]
[Focal Length
Set]
152
[Motion Picture] → [Stabilizer]
Corrects vertical, horizontal and rotational jitter.
(Normal)
Corrects vertical jitter. This setting is ideal for panning (technique
of recording a subject by matching the camera movement with the
(Panning)
movement of a subject going in a specific direction).
[Stabilizer] does not work. ([
[OFF]
• When using a lens with an [O.I.S.] switch, set the switch to
[OFF].
Jitter during motion picture recording is corrected along the vertical, horizontal,
roll, pitch, and yaw axes by making use of the In-Lens Image Stabiliser, In-Body
Image Stabiliser, and Electronic Image Stabiliser. (5-Axis Hybrid Image Stabiliser)
[ON] / [OFF]
• When [ON] is selected, the angle of view of recorded motion pictures may
become narrower.
Allows you to enhance the image stabilization effect during motion picture
recording. This effect can keep the motion blur in the composition minimal when
you want to perform recording from a fixed perspective.
[ON] / [OFF]
• This effect works only during recording. [
screen.
• To change the composition during recording, set the effect to [OFF] first,
and then move the camera. Use the appropriate function button to change
the setting to [OFF] during recording.
• In situations where the focal length becomes greater, such as when a telephoto
lens is attached, the stabilization effect will be weaker.
• The stabilization effect may be weak depending on the lens used.
If the focal length is not set automatically, you can set it manually.
• When a manually selected focal length is set, a confirmation screen asking you
to change the focal length setting is displayed after you turn on the camera.
Selecting [Yes] allows you to set [Focal Length Set] in [Stabilizer].
Stabiliser, Zoom and Flash
])
] is displayed on the recording
(→60)
Correcting jitter
] is set

Advertisement

Table of Contents
loading

Table of Contents