Panasonic Lumix DC-GX9 Operating Instructions Manual page 170

[External
*
1
Flash]
[A Group]/
[B Group]/
[C Group]
*
1
Not available when [Wireless FP] is set to [ON].
*
2
This option is not available when the flash (DMW-FL200L: optional) is attached to the camera.
■
Enabling FP firing for the wireless flashes
During wireless recording, an external flash fires an FP flash (high speed repetition of
flash firing). This firing allows recording with the flash at a fast shutter speed.
→ [Rec] → [Flash] → [Wireless FP]
Settings: [ON] / [OFF]
■
Setting the communication light emission to be used when wireless flash
recording is performed
→ [Rec] → [Flash] → [Communication Light]
Settings: [HIGH] / [STANDARD] / [LOW]
170
[TTL]: The flash output is automatically adjusted.
[AUTO]
[Firing Mode] [MANUAL]: Manually sets the flash ratio of an external flash.
[OFF]: The flash of this unit fires only for a communication
Adjusts the flash output of the flash of this unit manually when
[Flash Adjust.]
[Firing Mode] is set to [TTL].
Sets the flash ratio of an external flash when [Firing Mode] is
[Manual Flash set to [MANUAL].
Adjust.] • You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
[TTL]: The flash output is automatically adjusted.
[AUTO]
[Firing Mode]
[MANUAL]: Manually sets the flash ratio of the wireless flash.
[OFF]: The wireless flashes of the set group do not fire.
Adjusts the flash output of the wireless flash manually when
[Flash Adjust.]
[Firing Mode] is set to [TTL].
Sets the flash ratio of the wireless flash when [Firing Mode] is
[Manual Flash
set to [MANUAL].
Adjust.]
• You can set the flash ratio from [1/1] (flash firing full power)
to [1/128] in 1/3 steps.
Taking Pictures with Wireless Flashes
*
2 : Sets the flash output using an external flash.
light emission.
*
1 : The wireless flash automatically sets the flash
output.
Stabiliser, Zoom and Flash