Lippert Components Solera 434718 User Manual
Lippert Components Solera 434718 User Manual

Lippert Components Solera 434718 User Manual

Universal hardware manual awning to solera classic manual awning

Advertisement

Quick Links

Table of Contents

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dometic Manual Awning to Solera® Classic Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Carefree Manual Awning to Solera® Classic Manual
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
lippertcomponents.com
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
574-537-8900
Solera
Universal Hardware
®
Manual Awning to
Solera Classic Manual Awning
(For Aftermarket Application)
Solera
Universal
Hardware
Manual Awning to Solera
Classic Manual Awning
(For Aftermarket Applications)
2
2
2
2
2
3
3
3
3
7
12
12
13
13
13
13
14
1
Rev: 11.17 - Solera
®
Universal Hardware Conversion
®
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solera 434718 and is the answer not in the manual?

Questions and answers

Summary of Contents for Lippert Components Solera 434718

  • Page 1: Table Of Contents

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Solera ® Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Applications) Table of Contents Introduction ..........System Information .
  • Page 2: Introduction

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Introduction Parts List System Information The Solera Classic Manual Awning is designed for use on ® most recreational vehicle units and is available in a variety of sizes to fit even the largest unit.
  • Page 3: Preparation

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Preparation Conversion Dometic Manual Awning to Solera Classic Manual Awning Resources Required • Additional Qualified Assistant NOTE: All screws supporting the awning assembly MUST have a backer within the structure of the wall of the unit. •...
  • Page 4 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 2. Unlock the travel locks, move the cam lock to the roll out 6. Separate the drive head from the support arm and position and fully extend the awning. secure the support arm to the unit in the travel position.
  • Page 5 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 10. Remove the spring assembly (Fig.6B) from the roll 15. Apply tension to the spring assembly by turning the tube (Fig.6A). drive head in a counterclockwise direction. The number of turns is determined by the position and size of the awning.
  • Page 6 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 19. Remove the fasteners from the lower mounting bracket 22. Using the provided #10 - 32 x 3 ” screws (Fig.12A), (Fig.10A) of the support arm assembly. secure the Solera upper mounting bracket (Fig.12B) to the same location as the previous bracket and using the same 20.
  • Page 7: Carefree Manual Awning To Solera Classic Manual Awning

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Carefree Manual Awning to Solera Classic Manual 27. Repeat Steps 5-26 for the idler side of the awning, skipping Awning all cam lock instructions. NOTE: The idler head does NOT have a cam lock, and NOTE: All screws supporting the awning assembly MUST therefore the cotter pin is holding all the tension of the spring have a backer within the structure of the wall of the unit.
  • Page 8 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 3. Insert a cotter pin (Fig.18A) into the end cap (Fig.18B) 5. On the drive side of the awning, if equipped, remove at each end of the awning. the cam lock assist (Fig.20B) from the lock pin (Fig.20A), making sure the cam lock remains in the roll out position.
  • Page 9 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 7. Separate the drive head from the support arm and 12. Place the Solera end cap onto the roll tube, making secure the support arm to the unit in the travel position. sure it is properly seated.
  • Page 10 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 16. Insert a cotter pin into the end cap once the proper 19. Remove the fasteners from the lower mounting bracket amount of tension has been set. of the support arm assembly (Fig.26).
  • Page 11 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) 22. Using the provided #10 - 32 x 3 ” screws (Fig.28A), 25. Pull the rafter arm (Fig.30A) up and lock it into drive secure the Solera upper mounting bracket (Fig.28B) to the head (Fig.30B) on the support arm assembly.
  • Page 12: Operation

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Operation 30. Locate the nearest hole on the lower channel and make Extending the Awning a non permanent marking for the stop bolt location. 1. Make sure the black locking knobs (Fig.33C) on 31.
  • Page 13: Optional Carport Position

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Maintenance Optional Carport Position Fabric Care 1. Once all the above steps are complete, remove the outer NOTE: If the awning is retracted while wet, extend the arm (Fig.33A and Fig.33E) from the side of the unit by awning and let it dry as soon as conditions allow before releasing the lever on the lower mounting bracket.
  • Page 14: Troubleshooting

    Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Troubleshooting Solera Classic Awning Troubleshooting What's Happening? What Should Be Done? Check position of the cam lock (roll out). Ensure that the travel locks have been released from the outer arm. Awning will not extend.
  • Page 15 Solera Universal Hardware ® Manual Awning to Solera Classic Manual Awning (For Aftermarket Application) Notes lippertcomponents.com 574-537-8900 Rev: 11.17 - Solera Universal Hardware Conversion ®...
  • Page 16 (For Aftermarket Application) Notes Manual information may be distributed as a complete document only, unless Lippert Components provides explicit consent to distribute individual parts. All manual information is subject to change without notice. Revised editions will be available for free download at lci1.com.

This manual is also suitable for:

Solera 434717

Table of Contents