Table of Contents
Advertisement
UP742.book Page 31 Tuesday, November 30, 2004 2:42 PM
Storing Ringer Tones
1) Connect the audio recording cable to the handset and sound source (e.g.stereo
or cd player). Insert one end of the audio recording cable into the handset's
headset jack and the other end into the sound source.
You can also simply use the handset's microphone by holding the handset close
to the sound source.
2) Go to
.
Re c /E d it R i ng s
3) Select a location from 1-5, and press the OPTIONS soft key.
4) Use the up/down key to select
press the RECORD soft key. The LCD displays
begins to count down.
5) When you are finished recording, press the STOP soft key. The
phone will play the recorded ringer. To record another ringer,
press the ReRec soft key.
6) Enter the title of this ringer (up to 12 digits) using the number
keypad,
*
/tone, #, the DELETE soft key, right, or left key.
7) Press menu/select, you will hear a confirmation tone, and
Playing the Ringer
1) Go to
.
Re c /E d it R i ng s
2) Select a ringer to play, and press the OPTIONS soft key.
3) Use the up/down key to select
menu/select. To stop, press menu/select again.
[ 3 1 ] S e t t i n g t h e R i n g e r O pt i o n s
. To start recording,
R e co r d
and then
20
D o ne !
. To start playing, press
Pl a y
appears.
w w w . u n i d e n . c o m
Advertisement
Table of Contents
