3.
Remove the trim ring.
M/T Vehicle:
•
Squeeze the plastic clip, and pull down on the
shift boot. Remove the shift knob by turning it
counterclockwise.
PLASTIC
CLIP
SHIFT
BOOT
•
Gently pry up on the trim ring to release the six
clips.
•
Unplug the two seat heater connectors
(if equipped), and remove the trim ring.
RETAINING
CLIPS (4)
TRIM
RING
SEAT HEATER
CONNECTOR
(If equipped.)
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
SHIFT KNOB
(Turn counterclockwise.)
2206032K
RETAINING
CLIPS (2)
2206041K
AII 24378 (0303)
A/T Vehicle:
•
Gently pry on the trim ring to release the six
clips.
•
Unplug the two seat heater connectors
(if equipped), and remove the trim ring.
RETAINING
CLIPS (4)
TRIM RING
4.
Remove the center holder.
•
Open the lid, and remove the coin pocket.
•
Remove the two self-tapping screws.
•
Gently pull out the dashboard center holder to
release the two retaining clips, unplug the
vehicle connector, and remove the center
holder.
With Coin Pocket:
SELF-TAPPING
SCREW
RETAINING
CLIPS (2)
RETAINING
CLIPS (2)
SEAT HEATER
CONNECTOR
(If equipped.)
2206112K
COIN
POCKET
LID
CENTER HOLDER
VEHICLE
CONNECTOR
2206061K
5 of 24