Advertisement
25. On the driver's side of the vehicle, locate the 6-pin
conector on the fuse box. Plug the XM radio harness
6-pin connector into the fuse box 6-pin connector.
NOTE: If the 6-pin connector is already being
used by another accessory, locate the 6-pin
connector taped to the XM radio harness. Remove
the dummy connector from the harness, and plug
the other accessory's harness 6-pin connector
into the XM radio harness.
XM RADIO HARNESS
6-PIN CONNECTOR
6-PIN
CONNECTOR
FUSE
LABEL
2A
LABEL
5A
LABEL
26. Attach the fuse labels to the fuse cases on the
XM radio harness.
© 2003 American Honda Motor Co., Inc - All Rights Reserved.
OTHER
ACCESSORY
6-PIN
HARNESS
DUMMY
CONNECTOR
(Discard.)
2524060M
FUSE BOX
6-PIN
CONNECTOR
FUSE
CASES
XM RADIO
HARNESS
CLIP
2524051M
FUSE LABEL
3121030M
Use these
labels.
AII 24378 (0303)
27. Install the XM radio harness fuse cases and the
6-pin dummy connector to the fuse box case.
Fuse case position
VEHICLE
HARNESS
(Do not
secure
to the
yellow
SRS
harness.)
28. Secure the XM radio harness to the vehicle
harness with one wire tie. Do not secure it to the
yellow SRS harness.
29. Route the XM radio harness under the steering
shaft and toward the center console.
VEHICLE HARNESS
XM RADIO
HARNESS
30. Loosely attach the XM radio harness to the
vehicle harness with three wire ties.
FUSE
CASES
WIRE TIE
XM RADIO
HARNESS
2N28020M
XM RADIO HARNESS
6-PIN CONNECTOR
WITH DUMMY
CONNECTOR
WIRE TIES (3)
CENTER
CONSOLE
2N28030M
11 of 24
Advertisement
