Download Print this page

Technical Data - Raypak 130 Specifications

Pool and spa heater

Advertisement

Raypak Versa 130 Gas Heater
46-41/64
HIGH WIND
OUTDOOR TOP
THERMOSTAT
(OPTIONAL)
26-55/64
18-1/4
ELECTRICAL
CONNECTION
11-7/16
GAS
CONNECTION
ALL DIMENSIONS ARE IN INCHES
An electronic heater using propane gas is "EP"; an electronic heater using natural gas is "EN". A Millivolt heater using propane gas is "MP"; a Millivolt heater using natural gas is "MN".
Prefix "P" is for plastic (polymer) headers. Suffix "X" is for cupro-nickel tubing; "C" is for copper tubing
Example: P-R130A-EN-X = Plastic headers, 130 model size, electronic ignition, natural gas, cupro-nickel
Versa 130 Standard Features
All models
• PolyTuf Textured Powder Coating
The Raypak gas heater has a polyester-coated, non-corrosive cabinet that is more durable
than solventborne- and waterborne-coated metal cabinets. Every piece of sheet metal goes
through a 7-stage wash system, making certain the powder paint has a perfect bond.
Underneath the tough, yet beautiful finish you will find galvanized metal that offers supe-
rior rust prevention and years of durable service.
• Wind-Resistant Design
No need for fans to combat drafting problems. This heater is designed to draft naturally in
outdoor installations with its exclusive low-profile design. It is so thoughtfully and careful-
ly designed it actually protects itself from the things that tend to stifle ordinary pool and
spa heaters. It delivers uninterrupted heating performance regardless of falling leaves,
wind, airborne debris, rain, downdrafts, updrafts, sleet, snow, etc.
• Polymer Headers
Polymer headers prevent rust stains from harming your pool or spa's surface, giving you
years of trouble-free swimming pleasure.
• All-Copper-Fin-Tube Heat Exchanger
The fin tubes of the heat exchanger are each made from a single piece of extruded copper.
This integral-fin design allows maximum heat transfer to be attained and maintained.
Cupro-nickel is also available as an optional upgrade.
• Stainless Steel Tube Sheet
Stainless steel tube sheets are used on all Raypak gas heaters. This allows for a complete-
ly nonferrous waterway, leaving your pool truly rust-free.
• 2" and 1-1/2" Water Connections
Supplied with every Raypak heater is a set of 1-1/2" PVC hose connections to make your
installation secure and effortless. Easily accommodates 2" plumbing with optional
adapters.
• Burner Tray
Every burner tray is built to last, from the stainless steel burners to the aluminized metal
used in the heat sensitive areas. Innovative design allows for the easy removal of the tray
and burners for servicing.
• Fire Tile
A ceramic fiber combustion box keeps your heater running efficiently while keeping the out-
side jacket cool. By using this space-age material the heater won't retain residual heat
after it is turned off, allowing it to be installed without the use of costly metal heat sinks.
• Fuel-Efficient
Energy-smart Raypak heaters consistently achieve the highest efficiency ratings. They
exceed all federal and state standards.
In keeping with its policy of continuous progress and product improvement, Raypak reserves the right to make changes without notice
Raypak, Inc.
2151 Eastman Avenue,Oxnard, CA 93030
Phone (805) 278-5300, Fax (800) 872-9725
www.raypak.com

Technical Data

15-13/32
ON/OFF
SWITCH
26-11/32
12-7/8
Swimming Pool and Spa
Heating Products
6
4-1/4
32-21/32
STACKLESS
OUTDOOR TOP
(SUPPLIED)
21-21/32
Electronic ignition models only
• Electronic Ignition
Raypak electronic ignition heaters come standard with direct spark ignition flame safety
controls. What this means is that the heater only comes on when there is a call for heat.
This provides an energy-efficient way to control your heater's gas usage by eliminating the
need for a continuous pilot.
• Dual Voltage 120/240v
The Raypak electronic heater can easily be hooked up to 120v power via its own 3-1/2 foot
built in power cord with 3-prong plug. It can also be wired for use with a conduit connec-
tion, this allows the installer to wire 120/240v directly to the transformer. No other small
heater offers you this much flexibility.
Millivolt models only
• Mechanical Thermostat
The Raypak millivolt gas heater comes with one mechanical thermostat. This control allows
you to set your pool or spa temperature precisely at your favorite setting.
• Millivolt Controls
No power source is required for the Raypak Millivolt heater. All operating electricity is sup-
plied by the pilot thermocouple.
Quality assurance
• ISO 9001
We are proud to be an ISO 9001 registered manufacturing plant. It's one more reason why
Raypak is number one in the heater industry today.
• End-of-Line Test
Every Raypak gas pool heater is plumbed and test-fired before it is put in the carton. This
ensures that your heater will work right out of the box and continue to give you years of trou-
ble-free operation.
• Quality Check Points
The Raypak assembly process includes six final assembly quality check points that help to
ensure that every Raypak gas heater is built correctly, and built to last.
• CSA-Certified
All of Raypak's gas pool heaters are CSA-certified and are tested by CSA to the ANSI Z21.56
standard.
4-3/8
42-3/8
BTU INPUT
INDOOR
DRAFTHOOD
(OPTIONAL)
130,000
SHIPPING
WEIGHT (lbs)
125
6100.28B
04-01-08

Advertisement

loading

This manual is also suitable for:

Versa 130