Settings And Adjustments - Key Digital KD-4x4CSA Operating Instructions Manual

6
Notes:
›
Front LEDs will scroll during boot up
»
Video OFF setting for an output is represented by a steady blinking of the selected input
»
indicator LED for the respective output

Settings and Adjustments

The KD-4x4CSA/KD-8x8CSA unit may be configured using the provided IR Remote. Such settings
and adjustments include unit address, matrix switching, and EDID settings. Factory Reset may be
completed by using the push buttons.
Addressing Mode
Units may be addressed when used in a multi-unit system. The Key Digital IR Remote is required
to change the address of the KD-4x4CSA/KD-8x8CSA unit. Please press the following sequence
on the Key Digital IR Remote to change the address.
R3 » R1 » R2 » X » X
X = Numeric Keypad Button from the IR Remote (Device Select)
»
Default address is 00 – Single unit mode.
»
All addresses must be two digits long
»
All LED lights will blink once to confirm the address has been set.
»
Once a unit has been addressed, the two digit address must precede all IR command
»
sequences
Matrix Switching
The Key Digital IR Remote is required to change the selected input to an output of the KD-
4x4CSA/KD-8x8CSA unit. Please press the following sequence on the Key Digital IR Remote to
switch the input of an output.
B » A
B = Numeric Output Button 1 through 8 from the IR Remote (Output)
»
A = Numeric Input Button 1 through 8 from the IR Remote (Input)
»
EDID Control
EDID (Extended Display Identification Data) is a data structure provided by a digital display to
describe its capabilities to a video source. This data is also known as a "handshake" and typically
includes manufacturer, serial number, product type, resolutions supported by the display, display
size, pixel mapping data, etc.
Key Digital EDID Control allows the integrator to choose the handshake that will be provided to
source devices of the system. The EDID handshake is relayed to the source from the Champion
Series switch, or from the first connected display (default setting). This handshake will always be
the EDID information that the source device receives.
The Key Digital IR Remote is required to change the EDID of a specific input. Please press the
following sequence on the Key Digital IR Remote to change the source EDID settings:
R2 » R1 » R3 » A » X » X
X = Numeric Keypad Button from the IR Remote (Device Select)
»
A = Numeric Input Button 1 through 8 from the IR Remote (Input)
»
All LED lights will blink once to confirm the EDID mode has been set.
»
The EDID may also be copied from a specified Output to a specific Input. Please press the
following sequence on the Key Digital IR Remote to change the EDID settings:
R2 » R1 » R3 » A » B
A = Numeric Input Button 1 through 8 from the IR Remote (Input)
»
B = Numeric Output Button 1 through 8 from the IR Remote (Output)
»
All LED lights will blink once to confirm the EDID mode has been set.
»
The possible EDID settings can range from '00' to '15'. ('04' is the default).
00 Copy EDID from HDMI Output
01 1080i@60, 2Ch PCM Audio
02 1080i@60, Dolby/DTS 5.1 Audio
03 1080i@60, HD Audio
04 1080p@60, 2Ch Audio (Default)
05 1080p@60, Dolby/DTS 5.1 Audio
06 1080p@60, HD PCM Audio
07 4Kx2K@30, 2Ch Audio
Resetting to Factory Default
To reset your KD-4x4CSA unit to factory default, please follow these steps:
Press and hold the Output 1 button and the Output 4 button on the front panel for 10
»
seconds.
To reset your KD-8x8CSA unit to factory default, please follow these steps:
Press and hold the Output 1 button and the Output 8 button on the front panel for 10
»
seconds.
Notes:
All LED lights will blink once to confirm that the unit has been reset.
»
Switch is defaulted back to Input 1 to Output 1, Input 2 to Output 2... Input 8 to Output 8
»
All HDMI Outputs are on
»
Address Mode will reset to 00
»
Each input EDID will be set to EDID preset 04.
»
All Analog and Digital Audio outputs are enabled
»
08 4Kx2K@30, Dolby/DTS 5.1 Audio
09 4Kx2K@30, HD Audio
10 4Kx2K@60, 2Ch PCM Audio
11 4Kx2K@60, Dolby/DTS 5.1 Audio
12 4Kx2K@60, HD PCM Audio
13 1280x720p@60 DVI
14 1920x1080p@60 DVI
15 3840x2160p@60 DVI
7