Siemens S7-200 Manual page 5

Micro Automation Set 14
Automation solution – Set 14
The automation solution uses an S7-200 controller¹ with clock cartridge for
acquisition of the process data and for generating a time stamp. The data
records are sent cyclically from the S7-200 controller to a control center²
connected via Ethernet and archived in this control center.
An S7-200, S7-300, S7-400 or a WinAC station are used as alternative
control centers². The archive data of the control center² can be accessed
with WinCC flexible. SCALANCE X108 enables access from the
automation or office network to the individual controllers.
Facility
management
S7-200 station
LOGO!
Power
¹ Referred to as "Basis" station in the following
² Referred to as "Backup" station in the following
V2.0
Entry ID 21062588
Production
Further
management
areas
(SIMATIC IT)
S7-300 station S7-400 station
M
SIMATIC S7-
CP 243- SCALANCE
200 1
05/18/05
Fields of Application and Benefit
WinAC station WinCC flexible
Automation network
Office network
X108
5/35