Technical Specifications - Philips AVENT SCF862 User Manual

Problem Possible cause
The appliance There is too much
is noisy, food in the jar.
produces an
unpleasant
smell, is hot to
touch, emits
smoke, etc.
The jar lid is not
closed properly.
You have been
using the blending
function for too
long.
There are white There is limescale
spots on the buildup on these
water tank and parts.
water tank lid.
The surfaces of Food colorings
the appliance may discolor the
that come parts that come
into contact into contact with
with food are food.
discolored.
The blending The blade unit is
jar leaks. not assembled
correctly.
Incorrect
assembly of the
blade shaft seal
on the blade unit.

Technical specifications

-
Voltage/wattage: See type plate on the bottom of the appliance
- Maximum water capacity of the water tank: 180 ml
- Maximum capacity of the blending jar: 400 ml
- Operating temperature: 10°C to 40°C / 50°F to 104°F
-
Protection: Temperature-controlled heating system
Solution
Switch off the appliance and
process a smaller quantity.
Place the jar lid on the jar and close
it securely.
Do not let the appliance blend
continuously for more than
30 seconds at a time.
This is normal. Remove the
limescale periodically. Clean the
water tank lid and jar lid with a
moist cloth. Descale the water tank.
Refer to the "Descaling" section
in the "Cleaning and descaling"
chapter.
This is normal. This does not affect
the quality and the performance of
the appliance. All parts are still safe
to use and will do no harm to the
cooked food.
Tighten the blade unit.
Assemble the blade shaft seal
correctly (fig. ).
x
ENGLISH
27