Canon iR 3530 Easy Operation Manual page 5

Energy Consumption in Sleep Mode
Enables you to set the amount of energy that the machine consumes when it is in the
Sleep mode.
Tray Designation
Enables you to designate the machine's output trays to be used for specifi c functions.
Original Scanning Area Cleaning Display
Enables you to set the machine to display a message prompting you to clearn the original
scanning area for the feeder, when dirt has been detected.
(3/6)
Printing Priority
Enables you to set the machine's printing priority for each function.
*2 Displayed only if an optional feeder is attached.
Stack Bypass Standard Settings
Enables you to set the paper size and type that the stack bypass uses beforehand. This
setting is useful if you always load the same paper size and type into the stack bypass.
Paper Feed Method Switch
Enables you to make single or double sided prints without changing the orientation of the
paper in the paper deck. This is useful when printing on paper which has been printed
with a logo, etc. in advance.
Standard Local Print Settings
Enables you to set the standard print settings for the machine.
(4/6)
Language Switch (see p. 14)
Enables you to select the language displayed on the touch panel display.
Reversed Display (B/W)
Enables you to reverse the contrast on the touch panel display for better viewing. The
Reversed Display mode reverses the light and dark areas on the touch panel display.
Job Duration Display (see p. 13)
Enables you to display the remaining time that it takes to complete an operation in units of
(5/6)
one minute on the touch panel display.
Limited Functions Mode
Enables you to temporally limit the use of the fi nishing mode, if a problem frequently
occurs when using the fi nisher mode.
*3 Displayed only if an optional fi nisher is attached.
Additional Functions
4