9 Service Position
Note: For description of the disassembly procedures, see the Section 8.
9.1.
Checking of Panel P.C.B.
Step 1 Remove Top Cabinet.
Step 2 Detach Front Panel Unit.
Step 3 Attach 22P FFC at connector (CN2506) on Main P.C.B..
Step 4 Panel P.C.B. can be checked as diagram shown.
9.2.
Checking of Main P.C.B. and
SMPS Module
Step 1 Remove Top Cabinet.
Step 2 Detach Front Panel Unit.
Step 3 Remove Rear Panel.
Step 4 Remove Main P.C.B..
Step 5 Remove SMPS Module.
Step 6 Remove 2 screws.
Step 7 Remove fan.
29