Cleaning And Maintenance; Removing Scale Residues; Cleaning The Appliance; Multipurpose Brush - Silvercrest 86549 Operating Instructions Manual

GB
• Pour in the water using the funnel provided, slowly at first, to avoid splashing.
• After unplugging the appliance from the mains, wait at least 3 minutes
before adding water to the boiler tank;
• Tighten the safety cap (I).
• Plug the appliance back into the mains.
• Switch on the appliance; the red light will switch on.

Removing scale residues

IMPORTANT: Clean the boiler tank at least once every month so as to
remove any scale residues which might affect the normal operation of
the appliance.
IMPORTANT: Switch off the appliance, unplug it from the mains power
and leave it to cool before cleaning out the boiler tank, so as to avoid
the risk of scalds.
• Discharge any remaining pressure from the boiler tank, by holding down the steam dispens-
ing button (A) on the gun (C). Direct the steam jet into a special container.
• Slowly loosen the safety cap (I) then remove it completely.
• Slowly pour water into the boiler tank to avoid splashes. Shake the appliance and turn it
upside down to empty it. Repeat this step several times.
WARNING: Never add scale removers, vinegar or other perfumed sub-
stances to the tank, as these risk damaging the appliance with immedi-
ate cancellation of the warranty.

Cleaning the appliance

Make sure that the appliance is off (red light off) and unplug it before cleaning.
IMPORTANT: Do not use detergents or thinners.
1. Block the lock cursor (B) in place with the steam button and leave the appliance to cool
completely (approx. 2 hours).
2. If necessary, wipe the appliance clean with a damp cloth.
3. If necessary, clean the steam nozzle of the gun (D) with a needle.

Multipurpose brush

Floor brush

These accessories are machine washable. Follow the care instructions on the label.
58 GB

CLEANING AND MAINTENANCE