IntesisBox FJ-RC-MBS-1 User Manual page 24

13 0d
17 11
18 12
19 13
20 18
31 1F
32 20
33 21
34 32
The devices with Software Version 2.1 (See Register Address PLC 51) and all previous versions
backwards, which are connected to a model RAC of the G series, VRF J-II, VRF V-II or VRF VR-
II, require to add 100 to the error code that has been shown. For example, if the error shown is
17, the error which belongs to the list is 17+100=117.
In case to detect an error code not listed, contact your closest Fujitsu technical support service.
© Intesis Software S.L.U. - All rights reserved
This information is subject to change without notice
IntesisBox ® is a registered trademark of Intesis Software SLU
FJ-RC-MBS-1
Blower temperature thermistor Error
Drain Error
Room temperature Error
Indoor fan motor Error
VRF Standard wired remote Error
V / S / J Standard wired token Error
Series Network communication Error
Node setting error
Communication Error between Main PCB & Transmission
PCB
Outdoor unit Error
User's Manual r1.9 EN
URL http://www.intesisbox.com
Email info@intesisbox.com
Phone +34 938047134
24/24