Filter Indicator; Back Panel - Sharp KC-F30TA Operation Manuals

CARE AND MAINTENANCE

FILTER INDICATOR

The filter Indicator Light will turn
on after approximately 720 hours.
(30 days × 24 hours =720 hours)
This is a reminder to perform the
maintenance described below.
(Ref.E-11,E-12,E-13,E-14)
CARE INDEX
Sensor
Unit
(Ref.E-14)

BACK PANEL

SENSOR
Sensor (internal)
Back Panel
SENSOR
Sensor Filter
OM_KC-F30TA_EN.indd E-11 OM_KC-F30TA_EN.indd E-11
In case of using at the location where air pollution and odor are significant,
maintain frequently even if Filter Indicator Light is not ON.
HEPA Filter (Ref.E-14)
Deodorizing Filter
Gently remove dust with an appropriate cleaning tool,
such as a vacuum cleaner with the proper attachment.
NOTE How to clean when overly dirty
BACK PANEL
After performing
maintenance, reset
the Filter Indicator.
(Ref.E-14)
Back Panel
1. Add a small amount of kitchen detergent to
water and soak for about 10 minutes.
CAUTION
DO NOT apply excessive pressure when
scrubbing the back panel.
2.Rinse off the kitchen detergent with clean water.
3.Completely dry the filter in a well-ventilated area.
1. Remove the Back Panel and removing
the Sensor Filter.
2. Gently remove dust from the Sensor with
an appropriate cleaning tool, such as a
vacuum cleaner with the proper attachment.
3. If the Sensor Filter is overly dirty, wash it
with water and dry it thoroughly.
E-11
Press more than 3 seconds.
Humidifying Filter
Filter Frame
Humidifying Tray
(Ref.E-12,E-13)
4/7/2559 BE 11:03 AM 4/7/2559 BE 11:03 AM