Advertisement
1 Product Introduction
DGS-1500-20
16-Port 10/100/1000Mbps plus 4 1000Base-T/SFP ports SmartPro Switch.
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Reset: By pressing the Reset button, the Switch will change back to the default configuration and all changes
will be lost.
Port Link/Act/Speed LED (1-16, 17F, 18F, 19F, 20F): The port LEDs indicate a network link through the
corresponding port. Blinking indicates the Switch is either sending or receiving data to the port. When the port
LED glows in amber, it indicates the port is running on 10M or 100M. When the port LED glows in green, it is
running on 1000Mbps.
Rear Panel
Power: The power port is where to connect the AC power cord.
DGS-1500-28
24-Port 10/100/1000Mbps plus 4 1000Base-T/SFP ports SmartPro Switch.
Front Panel
Power LED : The Power LED lights up when the Switch is connected to a power source.
Port Link/Act/Speed LED (1-24, 25F, 26F, 27F, 28F): The Link/Act/Speed LED flashes, which indicates a
network link through the corresponding port. Blinking indicates that the Switch is either sending or receiving
data to the port. When a port has an amber light, this indicates that the port is running on 10M or 100M. When
it has a green light it is running on 1000M.
Figure 1.1 – DGS-1500-20 Front Panel
CAUTION: The MiniGBIC ports should use UL
listed Optical Transceiver product, Rated Laser
Class I. 3.3Vdc
Figure 1.2 – DGS-1500-20 Rear Panel
Figure 1.3 – DGS-1500-28 Front Panel
3
D-Link Web Smart Switch User Manual
SFP ports for optical transceivers
SFP ports for optical transceivers
Advertisement
