Raymarine Marine GPS System User Manual page 60

RayTech Navigator User's Guide
Toolbars Tab
The Toolbars tab of the Customize dialog box enables you to restore
Navigator's Toolbars to their factory default states, and also allows
you to create and name (and rename) custom Toolbars.
To display the Toolbars tab:
To reset Toolbars to original default settings:
To create and name a custom Toolbar:
To rename a custom Toolbar:
(Only Toolbars that you have created can be renamed or deleted.)
3-30
1. From the View menu (or right-click near the Toolbar display
area), select
Customize
2. Click the
Toolbars
1. Check the box(es) beside the Toolbar(s) you want to reset
2. Click ; or if you want to reset all the Toolbars at once,
Reset
click .
Reset All
1. Click . The Toolbar Name dialog box is displayed
New
(Figure 3-46).
2. Type the name you want for the Toolbar (up to 50 characters)
then click . The new Toolbar appears in the Toolbar
OK
window and also appears on the screen.
1. Click . The Toolbar Name dialog box is displayed
Rename
(Figure 3-46).
2. Type the new name you want for the Toolbar (up to 50
characters) then click
the Toolbar window and also appears on the screen.
to display the Customize dialog box.
tab (Figure 3-46).
. The new Toolbar appears in
OK