Changing the Target Display
The Pathfinder PLUS Radar allows you to improve target visibility
by changing the following:
These controls are accessed from the Functionbar Targets Button.
To change target mode settings:
You can use the buttons to change the settings of any or all the modes.
The top screen status bar updates to indicate which controls are on.
Interference rejection (
Target expansion (
Expansion
Target wakes (
Wakes
1.
Click the Targets button.
2.
Click
to toggle On/Off.
In Rej
3.
Click
Expansion
4.
Click
Wakes to
5.
Click
Clear Wakes
Advanced Navigator Functions
In Rej
)
)
)
to toggle On/Off.
select Off, Short, Medium, or Long wakes.
to remove wakes from the screen.
5-19