Manual Entry Of Latitude/Longitude (L/L Ent) - Raymarine Ray230 Owner's Handbook Manual

3-56
3.5.30.3.2
This operation is used to manually enter the latitude/longitude and UTC
time when normal SeaTalk or NMEA input of the position information is
not available. The radio will sound a 5-second-long alert tone every four
hours to remind you to update your position.
1. As described in section 3.5.30.3 DSC Operation above, select the DSC
operation L/L ENT. The 7-segment display shows L L, while the dot
matrix display shows the latest latitude data.
2. Press one of the following keys to initiate the corresponding
operation:
K e y s K e y s
K e y s K e y s K e y s
0 - 9 keys
ENT key
CLR key
SQ UP/
DOWN key
3. The subject items can be changed in the following order. Numeric values
that can be changed are flashing:
1. Degrees of lat at ten's place
2. Degrees of lat at unit's place
3. Minutes of lat at ten's place
4. Minutes of lat at unit's place
5. Degrees of lon at hundred's place 12. Minutes of UTC at ten's place
6. Degrees of lon at ten's place
7. Degrees of lon at unit's place
4. After changing the subject item, the display scrolls from latitude to
longitude to UTC. To submit the change of the position data as shown
in the display, press the ENT key. The unit exits Menu mode and returns
to normal operation.
To exit the Menu operation, press and hold the CLR key for 3 seconds.
The following illustration shows an example of the operation:

Manual Entry of Latitude/Longitude (L/L ENT)

Action Action
Action Action Action
Changes the flashing numeric value (see step 3), then
advances to the next digit's place.
Advances from Latitude, to Longitude, to UTC.
Returns to the previous subject item.
For Latitude, alternates between N and S.
For Longitude, alternates between E and W.
For UTC, no effect.
8. Minutes of lon at ten's place
9. Minutes of lon at unit's place
10. Hours of UTC at ten's place
11. Hours of UTC at unit's place
13. Minutes of UTC at unit's place
Operations