To Synthesize A Frequency Response Curve - Agilent Technologies 35670A Operator's Manual

Synthesis Option 1D3

To synthesize a frequency response curve

The analyzer plots the synthesized frequency response data on the active traces. In
this task, the magnitude is displayed on trace A and the phase is displayed on trace B.
The analyzer must be in FFT Analysis or Swept Sine instrument modes.
1
Create and display a synthesis table.
See the previous task, "To create a synthesis table."
Press [
TABLE ON OFF
2
Set up the active traces.
Press [ ] [
Active Trace
Press [ ], [
Meas Data
MORE CHOICES
3
Specify the measurement frequency span.
Press [ ] [ ] <number> <unit>, then press [
Freq
START
15-26
] to highlight OFF.
].
A B
], [
DATA REGISTER
Operator's Guide
], [ ].
D8
] <number> <unit>.
STOP
Agilent 35670A