Raymarine Pathfinder Manual page 93

Installation Guidelines
Pin No's.
1 2 3 4 5
6 7 8 9
Pathfinder
Power/Data cable
176
2
Connecting an hsb PCMCIA PC kit
2
To connect an hsb PCMCIA card to your PC system:
1. Place the RayTech CD-ROM into your computer's CD-ROM drive.
2
2. Plug your hsb PCMCIA card into the PCMCIA slot.
The Add New Hardware wizard is displayed.
9-pin Serial Cable
Part No. E86001
Pathfinder NMEA
Out cable
To connect NMEA directly to Raymarine Pathfinder displays:
Connect the cables as follow
E86001 serial data cable
Yellow PC Data IN (+)
Black PC Data Ground (-)
Green PC Data OUT (+)
Pathfinder power cable
Yellow
Orange
Blue
Green
Red
Black
Silver
Pathfinder NMEA out cable
Blue
White
Silver
3. Follow the on-screen instructions.
4. Click Finish .
2
hsb
PC
2
5. Attach the hsb /PC interface connector to the exposed socket on the PCM-
CIA card.
2
6. Attach an hsb transceiver cable from the hsb
system.
Pin 2
Pin 5
Pin 3
NMEA 1 IN (-)
NMEA 1 IN (+)
NMEA 2 IN (-)
NMEA 2 IN (+)
DC power (+)
DC power (-)
RF Ground
NMEA OUT (+)
NMEA OUT (-)
Not used
RayTech RNS V6.0 - Users Guide
2
/PC interface to your hsb
175
2