Selecting The Video Capture Device; Starting Webcam Go Control Help - Creative Video Blaster Go Plus User Manual

Selecting the video
capture device
• If you select the VFW driver,
some of the settings in the
General and Source tab may
not be available. If so, go to
the General tab and click the
Format or Source buttons to
change settings.
• The VFW driver is compatible
only with software that
supports Video For Windows.
Starting WebCam
Go Control Help
2-4 Using WebCam Go Plus as a Web Camera
To do so
1. In WebCam Go Control, click the Settings button.
2. Click the Camera docked settings button.
3. Click the scroll button until you get to the General tab.
4. Click the General tab.
5. In the Video device list box, select the desired video capture device.
The change is applied.
Note: The WDM driver gives better performance in terms of frame rate and is the
recommended choice.
This Help file contains instructions on how to use WebCam Go Control to take pictures and
record short videos. It also teaches you how to change settings so as to achieve optimum quality
for your pictures and videos.
To start the Help file
1. Click the Creative logo at the top left corner of WebCam Go Control's main window.
2. On the WebCam Go Control menu, click Help.