Creative Video Blaster Go Plus User Manual page 21

Verifying the installation
in Windows 2000
1-8 Installing WebCam Go Plus
3. Restart your computer.
4. Connect WebCam Go Plus's USB cable to
an available USB port on your computer
(see Figure 1-5 on page 1-6). Place
WebCam Go Plus on top of your computer
monitor or another flat surface.
The Digital Signature Not Found dialog
box appears (Figure 1-7) again, telling you
that Video Blaster WebCam Go Plus
(WDM) has been detected.
5. Ignore the message and click the Yes
button. Installation will be complete in a
while.
1. Right-click the My Computer icon on your desktop.
2. On the menu that appears, click Properties.
3. In the System Properties dialog box, click the Hardware tab.
4. Click the Device Manager button. A window appears.
5. Click the plus (+) sign next to the Imaging Device icon.
The entry "Video Blaster WebCam Go Plus (WDM)" should appear.
If the entry does not appear, repeat the installation procedure in "In Windows 2000" on page
1-7.
Figure 1-7: Digital Signature Not Found
dialog box.