Taking A Picture; Recording A Video Clip; Viewing An Image In Its Actual Size - Creative Video Blaster Go Plus User Manual

Taking a picture

Recording a video
clip
The built-in microphone in the
camera cannot be used to record
audio while the camera is
connected to the computer.
You need to use the microphone
which is connected to the audio
card.
Viewing an image in
its actual size
1. In the WebCam Go Control window, click the Live Cam button.
The current view of the camera is displayed in the Preview window.
2. To capture an image of the preview shown, click the Snap an image button.
You can also press the Snapshot button on the camera.
The image is captured and saved as an image file with an automatically generated file name.
It is added to the current album, where its name is prefixed with the still image icon
1. In the WebCam Go Control window, click the Live Cam button.
The window displays the current view of the camera.
2. To start recording a video, click the Record a video button.
The button starts blinking to indicate that recording is now in progress.
3. To stop the recording, click the button again.
The button stops blinking.
The video is saved as an AVI file with an automatically generated file name.
It is added to the album, where its name is prefixed with the video icon
1. Click the Album button.
2. Select the desired album.
3. Double-click the thumbnail of the image that is displayed in the Thumbnail list.
The image is displayed in the Video window, in its actual size.
If you are not satisfied with the result, adjust the appropriate settings in order to get the
desired result, and then capture the image again.
.
Using WebCam Go Plus as a Web Camera 2-3
.