Bosch GLM 100 C Operating/Safety Instructions Manual page 20

1
Double indirect height measurement
1
2
Indirect length measurement
1
Timer function
Wall-surface measurement
Angle measurement
g
Battery charge-control indicator
h Laser, switched on
i
Measurement reference
k Temperature warning
l Bluetooth® Indicator
m Device charging indicator
Bluetooth® activated, connection established
Bluetooth® activated, no connection established
n Slow Charging
this manual. Do not substitute any other charger. Use only Bosch
approved chargers with you product.
Note: The battery is supplied partially charged. To ensure full capacity of
the battery, completely charge the battery before using your measuring
tool for the first time.
The lithium-ion battery (integrated within the measuring tool) can be
charged at any time without reducing its service life.
Interrupting the charging procedure does not damage the battery.
When the bottom segment g flashes, only a few more measurements can
be carried out. Charge the battery.
Preparation
Use only charger which accompanied your product
or direct replacement as listed in the catalog or
-20-